Hot Thermal Conductive Grease Paste Silicone Plaster Syringe Heat Sink Compound for CPU Cooler Heatsink Plaster SA

High Heat Dissipation Performance Silicone Thermal Grease Paste Syringe Chipset Heatsink Plaster Glue Hot Thermal Conductive Grease Paste for CPU GPU Chip
Feature:
Meets RoHS and REACH environmental protection requirements. High thermal conductivity, high insulation, high temperature resistance, low oil content and no corrosion.
Working principle: fill the gap between heating element and cooling device; Increase the contact area to achieve the best heat conduction effect.
Usage: It is normal to have a small amount of silicone oil floating on it. Stir well before use. Keep the coating surface clean and apply it directly with tools (such as scrapers, finger sleeves, etc.).
Tips: Keep children away from it. If swallowed or accidentally entered eyes, ears, nose and mouth, please rinse with water or send to hospital if necessary.
Storage: Store at normal temperature. After use, please cover it properly to avoid dust and other impurities that have adverse effects on thermal conductivity.

Specification:
Material: thermally conductive silicone grease
Size: about 12cm/4.72in long
Net content: 3g
Thermal conductivity: 4.8 w/m-k
Density: 2.3g/cm3
Working temperature: -50-200℃
Color: Gray
Scope of application: Used for heat dissipation of CPU, GPU, MOS tube, LED lamp and temperature controller

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

1 X Thermal Conductive Grease Paste
1 X Scraper